Thermowood Pine decking

Thermowood Pine decking

Thermowood Finnish pine softwood decking
Size : 26x140x3000-5000 mm
Seno profile: Double smooth surface with profiled edges for hidden Senofix clip installation

  • Availability: On the way
  • Price without VAT 33,58 € / m²
  • Price with VAT 40,63 € / m²

Submit request

Thermowood terasy fotogalerie

Thermowood decking

Thermowood decking

Thermowood decking

Thermowood decking

Thermowood decking

Thermowood

ThermoWood is produced by treating it in temperature of 185 – 220 °C. Producing process is based on high temperature level and water steam. No chemicals are used. Thermo treatment gives the wood new, useful features.The best and newest features on the outdoor products are the excellent resistance against decay and permeability, which increase the length of the use and durability. Benefits to flooring are the beautiful colour and stability. In the sauna the lack of resin, developed resistance of decay and warmth conductivity are very beneficial features.                                                              Really hot battens do not feel as hot when they are made of ThermoWood. And on the other hand the floor does not feel cold under cold circumstances on bare skin when it is made of ThermoWood.

 

Decking profile

Origin

Finland

Resistance

Thermo treatment gives the wood new, useful features.The best and newest features on the outdoor products are the excellent resistance against decay and permeability, which increase the length of the use and durability.     

Colour and weathering

ThermoWood greys easily from the surface. To sustain the original colour and to avoid surface fractions finishing with UV- protection with ThermoWood tone of colour. As cover paints all the same paints are suitable as when painting the normal wood. Oil based finishing substances absorb to ThermoWood excellently and that is why they are good choice. Absorption of water based finishing substances is slower, so substances with long drying time are recommended.

Processing ThermoWood

Fine outcome is reached with fit cutters. ThermoWood is slightly more fragile and dryer than normal wood, so risk of tearing has grown a bit when processing the wood in horizontal direction.
Planing of ThermoWood should be done with slower speed than planing of normal wood. Lack of resin eases the planing and grinding.
When processing ThermoWood you have to acknowledge two important factors:
 
  • Sharp tools should be used to achieve the best result
  • The dust that generates is really dry and fine, so use of respirators is much recommended and working space should have a proper dust removal system.

Gluing

When using PVAc-clues it is recommended to have longer pressure and hardener times than with unprocessed wood, because water does not absorb as quickly into ThermoWood than it does to normal wood.
Polyurethane glues work well with ThermoWood. When using PU-glues, it has to be taken into account that the hardening reaction of PU needs water. Glues hardening with chemicals work with ThermoWood normally.


Mechanical joints

  • Screwing

The ThermoWood process can reduce splitting strength of the wood. The use of self-tapping screws or pre-drilling of holes must be made to avoid cracking of the material. It is recommended to use low threaded screws. It is very important to use stainless steel screws with countersunk heads for external usage or in other humid environments.

  • Nailing

Best results are gained when using a compressed air nail gun with adjustable nailing depth on the gun. Using a normal hammer increases risk of splitting due to accidental hammer contact with the wood.

Stainless steel or other rust free nails should be used when fixing ThermoWood outside or in humid conditions. It is also recommended to use small oval head nails as this also helps to reduce the risk of slitting.

If you want to restore the original color of the wood, use a professional wood brightener Saicos (nové okno) according to the technical data sheet. Then treat with a suitable protective carry oil paint.

Enviromental aspect

ThermoWood is very eco-friendly and natural product. Only high temperature and water steam are used in the production process. Chemicals are not used in any stage. ThermoWood does not load the nature. In the end of its life cycle it can be disposed by burning or placing it into the normal waste system.

Care and maintenance

Clean your deck regulary, keep it out of dirt, soil, sediments and pollen. This prevents the penetration of dirt macropores into the wood. The black dirt stains can occure under objects like umbrellas stands, flower pots, bowls, mats and other where water and hight moisture can stand without proper air ventilation.Therefore carry these objects time to time and ensure natural drying and ventilation. This helps to avoid creating of dark spots on the wood.

Read technical and installation information

Check our decking catalogue for many valuable informations and advices about our complete decking program, wood properties, methods of installation, etc. If you would like to have the catalog in printed version, contact us for sending.

Catalog in PDF download here katalog teras (nové okno)

Demand

Fields marked with an asterisk (*) are required.
We will help you select a suitable accessory.
Woody plants before you buy let show in our warehouse.
If you need urgent information call: Tel: +420 220 879 443

Rádi Vám poradíme s volbou
vhodného příslušenství.

Dřeviny Vám před koupí necháme
ukázat v našem skladu.

Pokud potřebujete urychleně
informace volejte na +420 220 879 443


fiberon SAICOS slp INTERFOR WESTERN RED CEDAR EXPORT ASSOCIATION

Pechar s.r.o.
Woodimport – wholesale
Náchodská 23, Praha 9, 19300

Retail sales

  • +420 220 879 443

Wholesale

  • +420 220 879 586

Division of coating

  • +420 220 879 587

© 2017 Pechar s.r.o.

Private policy | Sitemap

Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing

to top ↑